View TPCA8008-H_4613158.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TPCA8008-H
TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (MACH-MOS)
TPCA8008-H
High Speed Switching Applications Switching Regulator Applications DC/DC Converter Applications
6.00.3
Unit: mm
0.50.1 1.27 8 0.40.1 5 0.05 M A
* * * * * * *
Small footprint due to a small and thin package High-speed switching Small gate charge: QSW = 3.7 nC (typ.)
5.00.2
0.150.05
1 0.950.05
4
0.595 A
High forward transfer admittance: |Yfs| = 3.3S (typ.) Low leakage current: IDSS = 100 A (max) (VDS = 250 V) Enhancement mode: Vth = 2.0 to 4.0 V (VDS = 10 V, ID = 1 mA)
5.00.2
S 1 4
0.60.1
4.250.2
Characteristic Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC (Note 1)
Symbol VDSS VDGR VGSS ID IDP PD PD PD EAS IAR
Rating 250 250 20 4 8 45 2.8
Unit
8
V V V A W W
5 0.80.1
1, 2, 3 : SOURCE 4 : GATE 5, 6, 7, 8 : DRAIN
JEDEC JEITA TOSHIBA
2-5Q1A
Pulsed (Note 1) (Tc=25) (t = 10 s) (Note 2a)
Drain power dissipation Drain power dissipation
Weight: 0.069 g (typ.)
Drain power dissipation
(t = 10 s) (Note 2b)
1.6
W
Circuit Configuration
8 7 6 5
Single-pulse avalanche energy (Note 3) Avalanche current Repetitive avalanche energy (Tc=25) (Note 4) Channel temperature Storage temperature range
11 4 4.5 150 -55 to 150
mJ A mJ C C
EAR Tch Tstg
1
2
3
3.50.2
Absolute Maximum Ratings (Ta = 25C)
1.10.2
0.05 S
0.1660.05
Low drain-source ON-resistance: RDS (ON) = 0.47 (typ.)
4
Note: For Notes 1 to 4, refer to the next page.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
This transistor is an electrostatic-sensitive device. Handle with care.
1
2007-12-18
TPCA8008-H
Thermal Characteristics
Characteristic Thermal resistance, channel to case (Tc=25) Thermal resistance, channel to ambient (t = 10 s) (Note 2a) Symbol Rth (ch-c) Max 2.78 Unit C/W
Rth (ch-a)
44.6
C/W
Thermal resistance, channel to ambient (t = 10 s) (Note 2b)
Rth (ch-a)
78.1
C/W
Marking (Note 5)
TPCA 8008-H
* Type Lot No.
Note 1: The channel temperature should not exceed 150C during use. Note 2: (a) Device mounted on a glass-epoxy board (a) (b) Device mounted on a glass-epoxy board (b)
FR-4 25.4 x 25.4 x 0.8 (Unit: mm)
FR-4 25.4 x 25.4 x 0.8 (Unit: mm)
(a)
(b)
Note 3: VDD = 50 V, Tch = 25C (initial), L = 1mH, RG = 25 , IAR = 4 A Note 4: Repetitive rating: pulse width limited by max channel temperature Note 5: * Weekly code: (Three digits) Week of manufacture (01 for first week of year, continuing up to 52 or 53) Year of manufacture (The last digit of the calendar year)
2
2007-12-18
TPCA8008-H
Electrical Characteristics (Ta = 25C)
Characteristic Gate leakage current Drain cutoff current Symbol IGSS IDSS V (BR) DSS Drain-source breakdown voltage V (BR) DSX Vth RDS (ON) |Yfs| Ciss Crss Coss Rise time Turn-on time Switching time Fall time tf toff Qg Qgs Qgd Qsw VDD 200 V, VGS = 10 V, - ID = 4 A tr ton 4.7 VGS 10 V 0V ID = 2 A RL = 62.5 VDS = 10 V, VGS = 0 V, f = 1 MHz Test Condition VGS = 16 V, VDS = 0 V VDS = 250 V, VGS = 0 V ID = 10 mA, VGS = 0 V ID = 10 mA, VGS = -5 V ID = 10 mA, VGS = -20 V VDS = 10 V, ID = 1 mA VGS = 10 V, ID = 2 A VDS = 10 V, ID = 2 A Min 250 250 200 2.0 1.5 VOUT 17 13 ns Typ. 0.47 3.3 600 20 220 8 Max 10 100 4.0 0.58 pF V S V Unit A A
Gate threshold voltage Drain-source ON-resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance
Turn-off time Total gate charge (gate-source plus gate-drain) Gate-source charge Gate-drain ("Miller") charge Gate switch charge
VDD 125 V - < 1%, tw = 10 s Duty =
70 10 7.6 2.4 3.7
nC
Source-Drain Ratings and Characteristics (Ta = 25C)
Characteristic Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol IDRP VDSF Test Condition IDR = 4 A, VGS = 0 V Min Typ. Max 8 -2.0 Unit A V
3
2007-12-18
TPCA8008-H
ID - VDS
5 Common source Ta = 25C Pulse test 10 8 6 5.2 10 Common source Ta = 25C Pulse test
ID - VDS
10 8 6
(A)
(A)
4
5
8
5.7 5.5
ID
3
ID
4.8
6
5.3
Drain current
2
4.6 4.4
Drain current
4
5 4.7
1 VGS = 4 V 0 0
2
4.4 VGS = 4 V
1
2
3
4
5
0 0
2
4
6
8
10
Drain-source voltage
VDS
(V)
Drain-source voltage
VDS
(V)
ID - VGS
10 5
VDS - VGS
Common source
(V)
Common source 8 VDS = 10 V Pulse test 25 100
Ta = 25 4 Pulse test
ID
Drain-source voltage
6
VDS
3
Drain current
(A)
4
Ta = -55C
2
ID = 4 A
2
1
2 1
0 0
2
4
6
8
10
0 0
4
8
12
16
20
Gate-source voltage
VGS
(V)
Gate-source voltage
VGS
(V)
Yfs - ID (S)
100 Common source VDS = 10 V 10 Common source Ta = 25C Pulse test
RDS (ON) - ID
|Yfs|
Pulse test
Forward transfer admittance
10
Ta = -55C
Drain-source ON-resistance RDS (ON) ()
100 1 25
1 VGS = 10 V
0.1 0.1
1
10
100
0.1 0.1
1
10
Drain current
ID
(A)
Drain current
ID
(A)
4
2007-12-18
TPCA8008-H
RDS (ON) - Ta
1.6 Common source VGS = 10 V Pulse test 1.2 10 Common source Ta = 25C Pulse test
IDR - VDS (A)
Drain-source ON-resistance RDS (ON) ()
0.8
ID = 4 A 2
Drain reverse current
IDR
1 10 5 3 0.1 0 -0.2 -0.4 1 -0.6 1
0.4
0 -80
VGS = 0 V -0.8 -1.0
-40
0
40
80
120
160
Ambient temperature
Ta
(C)
Drain-source voltage
VDS
(V)
Capacitance - VDS
1000 Ciss 4
Vth - Ta Vth (V) Gate threshold voltage
(pF)
3
100
Capacitance
C
Coss
2
10 Common source VGS = 0 V f = 1 MHz Ta = 25C 1 0.1 1 10
Crss
Common source 1 VDS = 10 V ID = 1 mA Pulse test 0 -80 -40 0 40 80 120 160
100
Drain-source voltage
VDS
(V)
Ambient temperature
Ta
(C)
Dynamic input/output characteristics
300 24
(V)
20 VDS 100 50 VDS = 200 V 100 Common source 8 ID = 4 A VGS Ta = 25C Pulse test 0 0 5 10 0 15 4 12
VDS
200
16
Drain-source voltage
Total gate charge
Qg
(nC)
Gate-source voltage
VGS
(V)
5
2007-12-18
TPCA8008-H
rth - tw
1000 (1) Device mounted on a glass-epoxy board (a) (Note 2a) (2) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Tc=25 100 (1) (2)
Transient thermal impedance rth (C/W)
10 (3)
1
0.1 0.001
Single pulse 0.01 0.1 1 10 100 1000
Pulse width
tw
(s)
PD - Ta
3 (1) (1) Device mounted on a glass-epoxy board (a) (Note 2a) (2) Device mounted on a glass-epoxy board (b) (Note 2b) (2) 1.5 t = 10s 60
PD - Tc (W) PD Drain power dissipation
120 160 40 20 0
PD Drain power dissipation
(W)
2.5
2
1
0.5
0 0
40
80
0
40
80
120
160
Ambient temperature
Ta
(C)
Case temperature
Tc
(C)
Safe operating area
100
10
ID max (Pulse) * t =1ms * ID max (Continuous) 10ms *
Drain current
ID
1
(A)
DC Operation Tc = 25C
0.1
* Single - Pulse Tc = 25C Curves must be derated linearly with increase in VDSS max 10 100 1000 temperature.
0.01
1
Drain-source voltage
VDS
(V)
6
2007-12-18
TPCA8008-H
RESTRICTIONS ON PRODUCT USE
* Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
7
2007-12-18

▲Up To Search▲

Price & Availability of TPCA8008-H

	To Download TPCA8008-H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .